Triple TSM 6000 Complete Rig

SUBSTRUCTURE:

3.66m H x 5.49m W x 12.20m L (12" x 18" x 40") ; Setback capacity 78,000 daN

(175,000#) ; Casing capacity 78,000 daN (175,000#)

K.B. of 4.1m

MAST:

Gee Bee Alta 32.01m (105") Cantilever ; 125,000 daN (420,000#) G.N.C

DRAWWORKS:

TSM 6000 ; 336 kW (450HP) c/w 559mm (22" ;) single hydromatic brake and 2-speed box,hydraulic catheads and using 29mm (1 1/8" ;) drilling line ; c/w hydraulic survey and 2 tugger winches

Powered by Cat 3406 Diesel, 314 kW (420 HP) thru an Allison TC-955 torque converter

MUD PUMP:

Continental Emsco DB-550. Powered by Cat 3412-500HP

MUD SYSTEM:

Single tank: 2.74m W x 14.63m L x 1.83m H (9" x 48" x 6") ; 73.13m` (460 Bbl) capacity c/w, 2.7m3 (17 Bbl) trip tank and hole fill pump

DFTS linear motion shaker

Swaco F-001 single 305mm (12" ;) cone de-sander

Topco 10 cone de-silter

two - 5 HP agitators

one 660mm, NACE Poor Boy degasser

two 5 x 6 Mission Magnum mixing pumps powered by 50 HP electric motors

SHACK:

One only 3.66m x 14.02m (12" x 46") skidded, Roadway shack c/w washroom for

personnel

LIGHT PLANT HOUSE:

Cat 3306TA c/w 200 kW generator ; change house and accumulator

B.O.P.:

one 228.6mm Hydril Annular ; 21,000 kPa WP ; NACE Trim

one 228.6mm Shaffer LWP, pipe rams ; 21,000 kPa WP ; NACE Trim

one 228.6mm Shaffer LWP, blind rams ; 21,000 kPa WP ; NACE Trim

MANIFOLD:

76mm x 34,500 kPa (3" ; x 5,000#) c/w two Willis 50mm manual chokes

ACCUMULATOR:

Ingram 341 liter (9 x 10 gal) c/w triplex pump and nitrogen bottles

BLOCK/HOOK:

McKissick block unitized with BJ6150 hook ; 133,500 daN (150 Ton)

SWIVEL:

TSM-150 ; 133,500 daN (150 Ton) c/w Foster 77 Kelly spinner

ROTARY TABLE:

Ideco SR-175F ; 449.5mm (17 1/2" ;) ; 222,500 daN (250 Ton)

KELLY:

108.3mm x 12.5m square c/w Varco 4KRVS Kelly bushings.

TONGS:

Web Wilson Type AAX ; 3 1/2" ; to 10 3/4" ;

DRILL PIPE:

2,200m of 114.3mm (4 1/2" ;), 29.76 kg/m (20.00 #/ft), Grade E 4 1/2 XH tool joints

Pipe Inventories are subject to change

DRILL COLLARS:

21 only 159mm x 57mm, 4 1/2 XH tool joints

BOILER:

One only 80 HP Dupre/Volcano boiler c/w water and fuel tanks ; one set Norseman winterizing

WATER, FUEL, TOOL, DOGHOUSE

39.75 m3 (250 Bbl) water ; 15,456 liter (3,400 gal) fuel ; tool house, skidded c/wdrop down Doghouse. Basic Electronic Drilling Recorder (EDR

SUBSTRUCTURE:

Lee C. Moore Double skid 12 – 200 substructure (S/N CE 5813) 4.32m KB with 77,000 daN pipe setback and 111,200 daN table load

MAST:

38m (126’) Cantilever mast (triple) (S/N CE 5813) with 113,800 daN hook load with 8 lines

DRAWWORKS:

TMS unit 15 (500) HP with 15” double hydro-matic brake. Powered by a Detroit series 60 (450 HP) engine (S/N 06R002080) with an Allison 5 speed transmission. Ideco 175, 444.5mm (17.5”) rotary table

MUD PUMP:

1 Gardner Denver PZ-8 mud pump powered by a 3412 Cat 750 HP 1800 rpm engine (S/N 038S20343)

MUD TANK:

Waterflood 67 Cubic meter (53m3 useable) 5 compartment mud tank with 2-50 HP Magnum pumps low pressure system. C/W 26” Poor Boy degasser

SHALE SHAKER:

1 Brandt King Cobra high volume linear shaker with screens up to 300 mesh

GENERATOR:

1 3406 Cat (365 kw) Gen. Set.

B.O.P.:

228m (9”) MPA 21,000 kPa (3000psi) Townsend BOP consisting of 2 single gates (#1 S/N 866S) (#2 S/N 866) and one Annular (S/N SHA 1510) by an Oilco 80 gallon electric over hydraulic with a 5 station accumulator with electric controlled station in Doghouse

DOGHOUSE/WATER TANK:

8.38m x 2.54m Doghouse 40m3 water tank with oil storage room

14,000 L fuel tank on combination building

BLOCK/HOOK:

Nyang 160 ton Block and Hook assembly with 28.6mm (1 1/8”) drilling line (S/N M61391-M61590)

SWIVEL:

Gardner Denver 125 ton (S/N 2160)

PIPE TUBS:

4 Drive-Through loader tubs.

HANDLING TOOLS:

1 Foster model – 77 L Kelly Spinner and 1 Hawk Spinmaster 550-H pipe spinner

DRILL PIPE:

1420m of 114.3 x 24.71 kg/m E-75 drill pipe with 4 ½ XH connections (premium 162 jts.)

Pipe Inventories are subject to change

DRILL COLLARS:

18 – 159 mm drill collars with 4 ½ XH connections

BOILER:

-80 HP Saskatoon (S/N 4148)

CATWALK:

1 Self contained Catwalk complete with choke manifold